How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of unique steps to add a second ignition key. It requires dealer service with a handheld computer dubbed Tech-2. A new key and transponder have to be purchased and programmed to the car.
Make sure to rotate your keys in order to prevent one from wearing out quicker than the other. This will also help to keep your keys in good condition.
Replacement Case
The new key fobs for keys are not like the older Saab keys. They are equipped with electronics which make it hard to duplicate. This has made stealing cars considerably more difficult than it was just a few years ago. However, it also has made replacing lost keys a comparatively expensive undertaking.
her latest blog of a Saab 9-3 needs to have at minimum two working keys. It's expensive to replace a lost key because it requires replacing the CIM module, as well as programming the locking cylinders. Dealers charge between $100-$200 for this.
There are options to avoid these costly costs. Some parts suppliers will use the code of an extra key to cut a new metal blade for a fraction of the price of the dealer. The key must be exactly the same as the original for it to work in your vehicle.
Follow these steps to replace the case. You'll need a flathead and a lot of patience. With the screwdriver, you can pry off the plastic and then remove the emergency key. Once the case is open, remove all electronics and put them in your new case. Make sure to insert the correct key and badge back into the case, as well.
Replacement Battery
The Saab 9-3 replacement battery is a budget component that can be easily and quickly replaced. This YouTube tutorial for DIY user Cyclone Cyd explains how to replace the battery in the remote key fob in only four steps. This guide should work with any modern saab key fob however the procedure might differ slightly.
This button is usually located just below the Saab logo on the back of the fob. The button is usually found on the back of your fob, just below the Saab Logo. Then, use a flathead screwdriver to insert into the tiny hole in this button. This will allow you to open the case of the fob so that you can replace the battery.
Once you have installed the batteries CR1632, it is possible to put back together the remote key fob. Then, you can program it into your car. The whole process should take more than an hour or less. It's a simple process that does not require any special tools.
The process is more complicated if you lose your key, but still possible. The dealer has to first verify the VIN of the vehicle before requesting a replacement TWICE module and key blade that has the correct unique code. The dealer will then need to program the key using MDI which is a new software tool.
Replacement Key Fob
The key fob is the device that locks and unlocks your car. It is equipped with a battery within. The batteries last for a period of that is a long time, and they eventually fail. This is a common problem that happens with all cars and the good news is that you can change the batteries in most key fobs and not have to replace the entire case. You can purchase replacement fobs on Amazon that come with all the electronics already installed, so you can just pop open the case and replace those batteries that are old. It is necessary to remove the emergency key before you can replace the batteries. To do this, insert a small screwdriver that is flat into the slot in the middle. The case will split once you move the screwdriver around it.
If you're planning to replace your keys, make sure you have an extra set on hand. This will save you a lot of money. If you do have a spare, you can request that the dealer cut an entirely new key and then program it into your car, which is cheaper than replacing the whole key fob.
It is possible to add another key to your car if you don't already have one, but it takes lots of research and effort. It will cost you a few hundred dollars to get a second car key. The computer in the vehicle must also be programmed. Professionals can accomplish this, but it's an expensive option.
Replacement Ignition
In contrast to earlier Saab cars, the modern SAAB 9-3 models are equipped with a much more sophisticated alarm system that is built around a coded key. If you lose your only key, it can be costly to replace it with another one since the car must have a specific computer installed and also be programmed to accept a brand new key. Dealers can even charge hundreds of dollars to program an entirely new key, in the event that they are unable to do it.
If you've lost your sole working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) to create a replacement, and will charge a premium for it. Instead we can reprogram the EEPROM in your current car computer to make it ready to accept a second key, which will save you more than 50% of what you'd pay at a dealership.
If you've been a long-time owner of a 03-11 SAAB 9-3, then you probably know that the ignition key isn't all that robust. If the ignition key you have isn't functioning properly, you must look into replacing it. They can become sticky and the buttons are known to fall off. The good news is that replacing the ignition key isn't as difficult as it seems, and it can be done quickly with the right tools.